S-GAQ FUEL DISPENSER

S-GAQ FUEL DISPENSER

FlowMeter Type: Optional

Accuracy : ±0.2%

Pressure Loss (kg/cm): Under 0.25

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition: : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display: Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose: 4.5m

Weight : 285kg.

Dimension(L×W×H) : 1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 27

ank and fuel dispenser. It is incomprehensive to think that the higher vacuum pressure in inlet the better performance. Here is vacuum pressure of pump inlet formula: PZ = Pa－P1= P gh＋P [(υ1)2/2 ] = P ghf (2-9) PZ ── vacuum pressure of pump inlet Pa── absolute atmospheric pressure P1── absolute pressure of pump inlet g── acceleration of gravity h── height from pump inlet to oil level in tank υ1── velocity of pump inlet hf── energy loss in pipe from tank to pump inlet from formula 2-9, there are three exterior conditions depend vacuum pressure of pump: pressure needed to lift oil, σgh; the pressure that used to increase flow ve fuel dispenser locity, P [(υ1)2/2 ]; the pressure loss in pipeline, P ghf . Once oil contains air, along with pressure decrease, more air is separated. So dose that along with inlet vacuum pressure increases. Under there conditions, cavitation would occur in pipeline, causing pump’s normal operation. In order to prevent above disadvanta fuel dispenser ge effects, pay much attentions to installation of pipeline: ①tank should not be burred too deeply, the vertical distance from bottom valve to fuel dispenser no more than 4m, for example, regulated by some manufacturers with the purpose to prevent higher vacuum pressure of pump inlet; �?the diameter of pipe should not too small. As flow velocity correlate to section of pipeline, vacuum pressure at inlet of pump will be increased when high velocity in smaller diameter pipe; adopt as few as elbow in pipeline, preventing the connection with different diameter pipe, adopt pipe with smooth pipe wall. Rational installation of pipeline between tank and fuel dispenser benefit avoiding cavition and reduce vacuum pressure of pump inlet, which is also conducive to deduct business cost and power consumption. The unreasonable pipeline installation not only results in suction difficulty but also easily generate no suction in hot whether, increasing power loss. The wrong installation also leads to larg fuel dispenser

s:annotation　　 xs:documentation Aymara xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=az　　 xs:annotation　　 xs:documentation Azerbaijani xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=ba　　 xs:annotation　　 xs:documentation Bashkir xs:documentation　　 fuel dispenser xs:annotation　　 xs:enumeration　　 xs:enumeration value=be　　 xs:annotation　　 xs:documentation Byelorussian xs:documentation　　 xs:annotation　　 fuel dispenser xs:enumeration　　 xs:enumeration value=bg　　 xs:annotation　　 xs:documentation Bulgarian xs:documentation　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=bh　　 xs:annotation　　 xs:documentation Bihari xs:documentation　　August 2002 IFSF STANDARD FORECOURT PROTOCOL FP319_1.00　　 EPS POS INTERFACE SPECIFICATION　　Page 110 of 146　　 xs:annotation　　 xs:enumeration　　 xs:enumeration value=bi　　 xs:annotation　　 xs:documentation Bislama xs:documentation　　 fuel dispenser

the finances of final-salary schemes and sapped employers commitment to keeping them open. When pension funds sank into deficit a few years ago, companies rushed to close their schemes to new members. Mr Brown continued to trump long-term strategy with short-term tactics through the pension credit. Hastily drawn up to buttress support among the retired before the general election in 2001 and introduced in 2003, this top-up payment undoubtedly helps poorer pensioners. But it also discourages workers from saving for their retirement because, unlike the basic state pension, it is means-tested. For every additional pound of retirement income, those eligible for the credit los fuel dispenser e at least 40p as it is withdrawn. In effect, they are paying the top rate of income tax. This disincentive would not matter all that much if the pension credit affected few people. But according to the commission, 40% of pensioners are already eligible for it. Without reform, that share is projected to rise to 70% wi fuel dispenser thin 30 years (see chart). Almost two-thirds of financial advisers fear that if they flog pensions to moderate earners they may later be accused of mis-selling. Outsourcing policy Labour s haphazard policy-making thus contributed to the mess that the commission had to sort out. Lord Turner s approach could hardly have been more different. He and his colleagues considered the pension system in the round, taking into account both state and private provision. They started by conducting a thorough diagnosis. Their first report, published in October 2004, made clear that on current trends and policies, pensioners would end up much poorer in relation to the rest of society by the late 2020s. To avoid this outcome, either people would have to work longer; or they would have to save more; or the state would need to spend more on pensions. By spelling out the choices with bleak clarity, the commission prepared the ground for the sweeping changes that it recommended in its subsequent report. As Blairite fuel dispenser