K-GAQ FUEL DISPENSER

K-GAQ FUEL DISPENSER

FlowMeter :Type :Optional

Accuracy :±0.2%

Pressure Loss (kg/cm):Under 0.25

Motor Voltage(V):110V/220V/380V,50Hz/60Hz

Capacity(hp):1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter):Type:LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display:Type:LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer:1~~9,999,999

Hose:4.5m

Weight :280kg

Dimension(L×W×H) :1180*650*2020(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 29

lled to fasten card in case of preventing pull out. Keyboard is commonly used by reader and fuel dispenser. Filling operat fuel dispenser ion command firstly is received by reader, and transmitted into fuel dispenser through port I. Printer is optional. So, most IC card fuel dispenser isn’t mounted it. RF ant fuel dispenser enna is preset for adopting radio frequency card. By structure, there are no much differences between fuel dispenser’s IC card and the POS of commercial IC card. IC card fuel dispenser has many functions such as card read-write operation, data processing, safety attestation, data memory and management, keyboard operation, graphic display, exchange data with main board and with fuel management system, power supply management, etc. in order to integrate all above operations, some manufacturers adopt several single-chip. 5.2 Card-linkage technology Control type of fuel dispenser Fuel dispenser is divided into filling controlled type and filing uncontrolled type in terms of filling process. True mechanical fuel disp fuel dispenser enser and electronic fuel dispenser with electronic count function don’t have function of controlling filling. Computerized fuel dispenser basically is designed to be controllable type with two kinds of modes ---- collective control and disperse control. Collective control type is adopted manageable device to control fuel dispenser though command. Disperse control type, according to identifying user’s information, realizes operation of fuel dispenser by the device installed on fuel dispenser that identify IC card or other label carrier. According to different control type and employ mode, there are several operation methods: Indoor / outdoor filling Indoor filling: need authorized command sent by manageable device to open pump after holding up nozzle. Outdoor filling: needn’t authorized command sent by manageable device to open pump after holding up nozzle. Auto / non-auto authorized filling Auto authorized filling: manageable device automatically, after holding nozzle, transmit

　　 IFSF_MC = 1　　 DEVICE_STATUS bin8 (0-255)　　 bit 1 = Configuration Needed　　 fuel dispenser bit 2-7 = Reserved for future use　　 bit 8 = Software refresh required　　Periodically each device sends on the network a fuel dispenser broadcast message. The message is sent　　using the UNACKD message service. The period for this Heartbeat-message is defined by　　Data_Id 4 Heartbeat_Interval in the Communication Service Database. Each device can　　use it to control that the communication with this equipment is still available.　　The Recipient_Addr_Table is used by the communication layers to control that heartbeat　　messages are received from devices recorded in this address table.　　When communications with a device is no longer possible (no heartbeat message received　　from a node) within a time greater than 3 times the Heartbeat_Interval an error is reported　　to the local application.　　The IFSF_MC ( Message Code) is set to 1 for IFSF hear fuel dispenser tbeat messages. Heart beat messages　　are broadcast out onto domain 1 of the IFSF network.　　DEVICE_STATUS - Bit 1 is set i.e. Configuration Needed means that all data that is needed　　for correct operation is not available. Example: In the case of power loss a dispenser should　　send a Configuration Needed heartbeat since it can not know if it has the correct prices.　　NOTE - To allow devices on the same network to have different heartbeat intervals each　　device should read the other heartbeat intervals and use these (x3) before deciding not to　　send unsolicited messages to that device.　　February 2003 IFSF - STANDARD FORECOURT PROTOCOL FP2_1.84　　 COMMUNICATION SPECIFICATION　　 Page: 39　　4.6 Data Encryption　　In order to maintain system integrity for security purposes a

es appear to think that none of this matters very much compared to the benefits of having levered their elected prime minis fuel dispenser ter out of office, albeit by extra-democratic means. They are mistaken. However glad some Thais may be to see the back of a prime minister who had some authoritarian ways and fuel dispenser eye-popping conflicts of interest, their country has taken a big step backwards. Once you start allowing demonstrators who number in thousands to throw out politicians who have been elected by millions, the fabric of any democracy is bound to fray, let alone one that has existed for only 14 years and still lies under the shadow of crown and gun. Difficult days lie ahead. © 2006 . On Jerusalem, women and the economy, Brazil, Latin, Donald Rumsfeld, fake goods, oil May 4th 2006 From Economist.com The Economist, 25 St James s Street, London SW1A 1HG FAX 020 7839 2968 E-MAIL letters@economist.com Municipal unrest SIR �Your reasonable analysis of the current c fuel dispenser onflict over Jerusalem ignored two crucial reasons why Israel controls the city—the 1967 Arab-Israeli war and the security situation since 2000 (“The last conquest of Jerusalem� April 15th). Threatened with war by Egypt in 1967, the Israeli government pleaded with King Hussein of Jordan to stay out of the fighting. The hard and costly combat that ensued after Jordan launched air and ground attacks led Israel to conquer East Jerusalem and the rest of the West Bank. In 2000, Palestinians rejected Bill Clinton s plan for divided sovereignty over Jerusalem, including Arab control over Temple Mount and al-Aqsa mosque (which Israel had accepted). They have since launched another war, this time in a wave of terrorist attacks on civilians in buses, restaurants and other public places. Robert Lerman Washington, DC SIR �You gave the impression that Israel s policy on Jerusalem is an aggressive grab for land. For those with a short memory or an eclectic knowledge of recent history it w